Re: what do you guys think?

Posted by Glen in TX on November 26, 2006 at 12:22:34 from (208.246.9.189):

In Reply to: what do you guys think? posted by Tim Shultz on November 26, 2006 at 09:57:06:

If you cut that off and that center tounge out too it should work fine. Just be sure to move the square tube in far enough and gusset and also angle some heavy iron braces from existing bumper forward to frame so it won't fold under with heavy tongue weight on it. I've done several of the el cheapo bumpers by cutting out the center and ended up with something heavier than could be bought. If that's a air tank type bumper you have now and mounting irons are only welded on outside you need to start over or find something else though because it will pull off. Check junk yards and might find something ready to go?

Replies:

• Re: what do you guys think? Don L C 13:57:27 11/26/06 (1)
  • Re: what do you guys think? Glen in TX 15:00:39 11/26/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]