|
Tractor Talk Discussion Board |
Re: The Best Grease?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Louis G on September 06, 1999 at 00:08:01 from (207.19.4.87):
In Reply to: The Best Grease? posted by Paul R on September 04, 1999 at 08:49:04:
ALCO-METALUBE "INDUSTRY'S TOUGHEST LUBE"
Paul this grease is THE VERY BEST GREASE on the market. It is far superior to all the supposedly great greases on the market.
SPECS.:
• Thickener....................Lithum
• NLGI.........................Grade 2
• Double Weight Gravity........2.2
• Shock load resistance........132,000 psi minimum
• Timken OK load...............80+
• Temperature service range....-30°F to 750°F
• And it will not wash out!!!! With this grease you will NOT have squeeking after 8 hours of operation. With the Metalube you will reduce the amount of greasing by at least 1/3. Paul if you are interested I can mail you a picture of three hinge pins from the bucket on a backhoe. Two of the pins were lubricated with name brand top-of-the-line industrial greases and the third pin was lubricated with Metalube. The difference is nearly unbelievalbe...The two greased with Brand X are rusted, corroded, gouged and worn out. The pin greased with the Metalube is bright and shinny and shows no signs of wear. Did I mention that the pins lubricated with Brand X were run for three (3) months and the pin lubricated with the "INDUSTRY'S TOUGHEST LUBE" ALCO-METALUBE was run for ONE YEAR (12 FULL MONTHS)!!!!! I can send you a testimoninal letter from L. A. Ditching Co., Culver City, CA.
Follow Ups:
Post a Followup
|
