Tractor Talk Discussion Board |
Re: O/T: '88 Cherokee tilt column disassembly
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Chris Vangel on December 28, 2006 at 08:29:21 from (75.0.38.48):
In Reply to: O/T: '88 Cherokee tilt column disassembly posted by MeAnthony on December 28, 2006 at 05:43:50:
#1. You must first remove the tilt spring, there will be a round, silver retainer on the lower right of the column as you look at it. Insert a #2 philips screwdriver and turn about 30 degrees and it should come out. #2. The pin puller can be made by using a socket of the the correct diameter, a washer, and a machine bolt to fit the threaded hole in the center of the pin. Of course you can get one from the major tool trucks, but you probably won"t be doing this again. #3. At this point you can hold the tilt release and lift up the collar. The high beam linkage will come apart as well as the rack & pinion that activates the ignition switch. Usually you can lift it just high enough to allow the socket to get to the bolts, if not, just remove it completely. #3 The bolts are INVERTED TORX HEADS. A regular socket will not work, even if it feels good, you don"t want to strip them off. Remove one of the bolts and clean it with brakeclean. Apply Red Locktite to the threads and reinstall. Repeat this with all the mounting bolts, there are a total of FOUR. #4. Reassemble everything in reverse order of removal. It"s kind of a balancing act to get the high beam rod and the rack and pinion together all at once. Once aligned, you just drive the tilt pins in with a brass drift. Then reinstall the spring. Let me know if you need further help. I have repaired dozens of these. I was an auto tech for 15 years. I enjoyed doing these type of repairs. Chris.
Replies:
Home
| Forums
Today's Featured Article -
A Question for Dads This recent topic from the Tractor Talk discussion board is being highlighted because it is an awesome display of the caliber of individuals that have made this site their own. The young person asking questions received positive feedback and advice from total strangers who "told it like it is" with the care many reserve for their own kids. The advice is timeless... so although it isn't necessarily antique tractor related, it will be prominently displayed in our archives to honor those who have the courage to ask and those who have the courage to respond in an honest, positive manner.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|