Tractor Talk Discussion Board |
Re: Post Beam Barn - followup pics
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Walt Davies on January 15, 2007 at 09:53:29 from (72.173.58.4):
In Reply to: Post Beam Barn - followup pics posted by Jon(IN) on January 15, 2007 at 06:47:13:
Man there is no way i would work under that roof with that kind of damage. If one has pulled out like that then the whole place is suspect to coming apart at any second. If I were you and wanted to save the barn i would start taking it aprt from the top down. Be sure to susport it on all sides with heavy ,I mean heavy props. set in the ground good and secured to each main post. then you can take the roof off after that you should be able to work on it safely. But keep it well susported until it can stand on its own. and don't work alone get a large crew to help you. Or if you don't understand the principle I would hire the work out. Your life and limb ain't worth the risk to do it yourself. I have a simular type barn and I worry about it at times but the main frame is solid so far. Walt
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|