|
Tractor Talk Discussion Board |
Re: Re: Re: Reply to Marvin re:9N rebuilt
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by JJ on September 29, 1999 at 11:04:05 from (12.74.59.64):
In Reply to: Re: Re: Reply to Marvin re:9N rebuilt posted by Carl on September 29, 1999 at 06:28:11:
I presume that you really checked close to be sure the oil is comeing from underneath the head.
Before I tried to crank and run the engine, I would recheck the headbolt torque. Dry the oil off real good and spin engine over. It is possible the oil came from somewhere else and is running to the rear of head between the head and block. On a dry crankup engine, just a few spins of the engine should not have produced enough oil pressure to leak oil from underneath head.
I would bet the oil is coming from somewhere else.
Check all the external oil lines, the filter, and the filler , I bet you don't have a head problem, I've never seen one put oil out like that. Somewhere along the line installing the new engine maybe a little oil got spilled, it don't take but a little oil spill to make it look like a heck of a leak. Please let us know how it comes out, or if you need any info, give a holler.-JJ
Follow Ups:
Post a Followup
|
