Tractor Talk Discussion Board |
OT, Pole Building or Steel Truss, CANT DECIDE!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Randy in Pa on February 19, 2007 at 05:35:01 from (67.140.9.145):
Hello All, I know this is OT but I need some advice. After 17 years in the Machine shop/Welding Trade I developed some health problems and needed to get out. To make a long story short I ended up starting a Photo studio business that has outgrown my house and garage. I have room for a new 30x70 building that will be a small beauty shop for my wife, sales room, and studio room, so it will be drywalled and finished. I am looking at morton pole buildings, (engineered wood truss) which have come a long way since the early days and are pretty nice,.. and the steel truss style structure steel building. With the Morton it will come already stripped out and ready for drywall with flat ceiling. The walls will be insulated before morton strips it, but I will have to insulate the ceiling after the drywall installed. (blow in) I will just need to stud in the interior walls. The Morton contractor is local and has done a dozens of buildings in the area is has an excellent reputation. The Steel Truss building I think is a better structure overall, will already be fully insulated, but a lot more work to finish out the interior. It is also locally manufactured in Pittsburgh. I just need to find an local installer. The other problem is I want drywall ceilings through out, not hanging type ceilings, So I will have to almost have to build a building within a building to accomplish this I think. The building mfgs don't want anything heavy like a wood ceiling frame hanging from the structure. I am also thinking about building it 16ft high inside to make ( part )of the building have a second floor. This will be fine over the beauty shop and the sales room, but then the studio will have a 16ft high ceiling which is to high. 12 is all I need. It has also occurred to me to just make the whole building 12 ft and use some type of an attic truss for an upstairs. Anybody got any advice?
Replies:
Home
| Forums
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|