|
Tractor Talk Discussion Board |
Electrolysis HELP!!!!!!!!!!!!!!!!!!!!!! PLZ
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 1941 farmall a boy on February 22, 2007 at 12:56:42 from (216.98.171.61):
Today i was going to try the Electrolysis for the fun of it to see if any thing happen"s well nothing did i got the charger and ever thing i gotthe rust off one spot on the peace i was wanting to get free of rust and the other the same way well i put 7 gallons in about 3x2 space about 10 inches deep i put the watter in there frist and then put SUPPER WASHING SODA in it and put the - on the part and the + on the junk steel and turnd on my charger to 50 amps to just see and i did 10 and 2 amps and sat there for aobut 10 mins nothing i messd with the clamps that did not work. The charger is a auto one and i dont know if that has any thing to do with it or not. Dose any one know what is wrong i shure dont. Thanks a bunch Carson
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
