Re: Help A Dummy?

Posted by rgvtx on April 12, 2007 at 18:13:59 from (152.163.100.14):

In Reply to: Re: Help A Dummy? posted by cadet trooper on April 12, 2007 at 15:43:33:

Actually you have the right idea with the core drill. They also have them with a vacuum pump and pads that they use to core holes in the floor. The suction is really just there to keep the unit from lifting, not moving but I can see that something like that could work on stainless or any other non metalic surface. That is if the drill was light enough. Me, I'm a poor boy so I'll just have to continued using my little table top China made drill press with a half roll of good cloth duct tape to hold it in place.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]