Re: JD verses Farmall Rims

Posted by ChadS on May 15, 2007 at 06:49:41 from (65.151.85.56):

In Reply to: JD verses Farmall Rims posted by biggerred on May 14, 2007 at 17:57:27:

Deere rims fit the 450 cast hubs and vice versa. I just got done putting a set of deere rims on 450 centers. Made a nice setup! I used 826 driving lugs instead of the 450, bit heavier and they use larger bolts for the power the ol M has got. Wide selection of different widths that will bolt on. 14, 16, 18 20 22 inch wide rims. Not as easy to switch as 9 bolt pressed steel, but, it works and I dont have to cut and weld a set up. Chad

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]