Posted by Mark FL on July 21, 2008 at 18:50:45 from (67.233.222.113):
I'm looking at a 1967 Ford F250 to restore. The front of the truck was side swiped in an intersection and the two frame rails from the motor cradle forward are bent at a 45% angle. How difficult would it be to straighten those? The owner was in the process of restoring it and has two innerfenderwells and a radiator for it. He wants little more than junk value. The 300 six cylinder runs ok. It has the four on the floor with creeper low. He has an uncle who works in a body shop who measured the frame in several places from the motor back and says it is ok. Is an F100 frame the same as an F250 frame? I could possibly switch them out. I like the truck because we had a 1967 similar to it in my younger days. The inside of the cab is in great shape. Has the usual rust in the floor boards, cab mounts etc. I would need a different hood, fenders, grill, front cross member for the radiator to mount to and a few other parts. The bed is in ok shape with some bondo and rust in places. The 1967's through 1972 share the same body.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
