Posted by RayP(MI) on November 01, 2008 at 16:08:01 from (207.241.137.116):
Last week, wife and daughter-in-law took a bunch of rabbits to the American Rabbit Association national convention in Louisville. From here in Michigan, and a trip like that, you can bet I had that car checked over pretty thoroughly.... Had the tire dealer balance and rotate the tires. While he had it up, I checked the brakes all the way around. Plenty of pad!
On the way down, I get this call "Is it just because I've been driving in the rain, that my brakes are grinding?" "NO DEAR, IT'S NOT"
Well, they limped home, Thursday nite. Friday I pulled the wheels, one of the rear pads was completely missing, and the metal plate was all that was left, rubbing on the rotor. Best I can figure, the pad had to have come un-bonded from the backing plate.
My car (same make and model) was also grinding. Pulled the wheels and same thing was wrong - pad completely missing. Now this set of brakes were replaced less than two months ago. Paint on brake pad backs was still new. I did both brake jobs myself, and I know they were done right. Still had the box off'n the brakes setting on the workbench, as I had saved the old pads - might need one in an emergency, when parts store closed! GUESS WHERE THESE NATIONAL NAME-BRAND BRAKE PADS WERE MADE. What's even worse, I had a nasty time fitting the NEW pads from another national store in the mounting brackets.. Had to modify them by grinding off edges, to make them fit. Guess where these brake pads were made.
This is not only getting old real fast, but it's a SAFETY hazard. I'm NOT happy!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
