Tractor Talk Discussion Board |
Re: Re: Re: Firestone Tires
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brian G. on December 20, 2000 at 16:55:46 from (216.238.172.209):
In Reply to: Re: Re: Firestone Tires posted by Burrhead on December 19, 2000 at 17:17:26:
Those Firestones were some of the best tires I ever owned. I had actually taken them off the Explorer at 45M miles and put them on my F100 because I calculated they were only half worn out. My wifey wanted new tires 'cause she's the one still working and she drives some steep hills here in the back woods of upper NYS. Let me tell you what I think is the main problem. Aluminum wheels tend to corrode at the tire bead which causes leakage after a few years. People don't pay enuf attention to tire pressure and when run low on air, tires get hot. A great deal of the reported accidents happened in the southern states and South America where pavement heat adds to the problem. Incidentally, I just got a new sticker from Ford to put on my driver's door. It tells me to put 30 PSI in my tires instead of the previously recommended 26 PSI. I always ran 32 PSI anyway. BTW, my Firestone dealer told me he found only one tire (out of 240) that had the slightest hint of tread separation.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|