I don't know of any. Post the specs if you do. I've never come across a diesel that made as much horse or torque as a gas engine with same bore and stroke (unless turbocharged).
A few good examples.
Isuzu took their gas engines and converted them to diesel, so some are the exact same bore and stroke. Chevy used some in S10s, Chevettes, LUVs.
Chevy/Isuzu 1.8 liter gas (110 cubic inches) four-cylinder, 80 hp at 4800 rpm and 95 lb./ft. torque at 3000 rpm 3.31" bore x 3.23" stroke.
Same when converted to diesel. Chevy/Isuzu 1.8 liter diesel (110 cubic inches) four-cylinder, 51 hp at 5000 rpm and 77 lb./ft. torque at 2000 rpm 3.31" bore x 3.23" stroke
Now, take a Isuzu and compare to a Chevy designed gas engine with similar bore, stroke, size.
GM/Isuzu 2.2 liter (139 c.i.) diesel - 62 horse at 4200 RPM and 96 lb. ft. torque at 2200 RPM 3.4" bore by 3.62" stroke
Chevy Vega 2.2 liter gas engine, (140 c.i.) - 90 horse at 4600 RPM, 115 lbs. torque at 2400 RPM, 3.5” bore by 3.62” stroke
Now, compare a straight-six diesel Dodge used in 1/2 ton pickups to a similar sized straight-six gas engine Chevy used.
Dodge 1/2 ton pickup diesel, 3.9 liter, 243 cubic inches, in-line six cylinder, 100 horse at 3700 RPM, 165 lbs. torque at 2200 RPM. 3.62” bore by 3.94” stroke.
Chevy gas engine, 4 liter, 250 cubic inches, in-line six cylinder, 145 horse at 4200 RPM, 230 lbs. torque at 1600 RPM, 3.9” bore by 4.5” stroke.
Now, compare John Deere 1010 diesel and 2010 gas -both exactly same size, bore and stroke.
John Deere 1010 diesel engine, 2.4 liter, 145 cubic inches, 40 flywheel horsepower at 2500 RPM, 95 lbs.torque at 1500 RPM, 3.62” bore by 3.5” stroke.
John Deere 2010 gas engine, 2.4 liter, 145 cubic inches, 50 flywheel horsepower at 2500 RPM, 114 lbs.torque at 1500 RPM, 3.62” bore by 3.5” stroke
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
