Farmall & IHC Tractors Discussion Board |
Farmall A Zenith Carb questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Chad from Michigan on March 07, 2007 at 06:24:28 from (152.72.151.71):
Ok I have a 1946 A with the Zenith Carb. I see on one web site there is 2 different zenith Carbs. My carb #'s are 52499, 9752, DB Well I got the bowl gasget from the dealer and cleaned the carb real good. Now I got the tractor to run but it is slow and spits and sputter some when I advance the throtal. I am guessing it isn't getting enough gas. I Know I need to check the sediment bowl screen. The inlet screen in the carb is nice and clean. Ok there is a adjustment screw in the top of the carb that faces the front of the tractor. I can screw that in or out and it doesn't make one bit of difference in the engine. Do I have plugged passage way? what does this screw do? Also does anyone have a info sheet on settings for this carb? Float levels and such? Thanks for the help. Chad
Replies:
Home
| Forums
Today's Featured Article -
Identifying Your Tractor - by Staff. Maybe you bought it from a friend who didn't know what kind of tractor it was, or perhaps (and this is every tractor fanatics dream) you stumbled across it in an abandoned field covered with weeds but intact. In any case, you have no idea what the make and/or model is. For awhile perhaps it doesn't really matter. Especially if it runs! But pretty soon you'll probably need to tinker with it a bit and maybe buy a part or too. Having a manual is nice. But how does one go about dete
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|