Re: Generac Generator

Posted by Janicholson on April 15, 2007 at 13:46:24 from (66.173.50.102):

In Reply to: Generac Generator posted by hbauer on April 15, 2007 at 09:48:19:

Here is my input I have only ideas, no experience with that unit. If there is no oil pressure because the oil pump lost prime, then you have good reason not to run it. If there is low oil in the crank case then you have, again, good reason to not run it. Check where the low oil switch is placed, if it is in an oil gallery, I would pull it out and squirt about 100 pumps of engine oil into the gallery with a pump squirt oil can, with a rubber hose adapted to the hole. If it will take no oil that way, I would put a pressure gauge in the hole to be certain there is pressure befor assuming so. I hope this helps, Call or Email the manufacturer to obtain the needed information. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]