Re: CNKS Intake solution

Posted by MN Scott on May 20, 2007 at 07:58:29 from (206.9.216.60):

In Reply to: CNKS Intake solution posted by Janicholson on May 20, 2007 at 06:56:11:

What brand of intake manifold gasket did you use? When I replaced the one on my 706 I got a flat sandwich type gasket from A&I. I had the same problem a gap. I went to the dealer and bought the IH one that is a flat peice of tin with thick sealing rings around the intake ports, problem solved. Also you gotta torque those bolts down tight and don't tighten the two manifolds together untill you tighten the block to intake bolts first.

Replies:

• Re: CNKS Intake solution CNKS 19:21:43 05/20/07 (1)
  • Re: CNKS Intake solution MN Scott 20:37:33 05/20/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]