|
Farmall & IHC Tractors Discussion Board |
Live hydraulics on Super H, M, MTA
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on July 01, 2003 at 18:04:36 from (207.178.96.212):
Has anyone disassembled and reassembled the hydraulic reservoir on the Stage 2 Super H, etc? The high pressure tube fits into holes in the front of the reservoir and the valve body cover. At the same time the inner lever that attaches to the outside control lever must fit into a slot in the cam/piston lever in order to activate the hydraulics. All of this is inside the reservoir. Since the back plate is bolted to the valve body it is impossible to see anything while assembling and it has to be done by feel. I don't have a factory hydraulic manual, but the IT manual says to "be sure the high pressure tube is in position and tip the back plate to engage the cam lever with the inner control valve." I can position the high pressure tube but can't seem to get the cam lever into the slot. Any suggestions from someone who has done this? Thanks in advance.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
