Re: F-20 oil pump

Posted by Randy in NE on August 21, 2003 at 09:20:57 from (216.58.237.20):

In Reply to: F-20 oil pump posted by toot on August 21, 2003 at 08:11:56:

Is it the oil pump or the gauge? You can remove the oil pressure gauge and verify that the port is clear of gunk. You can take the valve cover off and see if has been getting oil up on top. If you have the pan off you could drop the bearing caps and make sure they have a good film of oil before starting it up again. May even squirt some oil in through the spark plug holes to lubricate the rings/cylinder walls. As long as everything has a good film of oil you could start it up with the valve cover off. You should see a small amount of oil coming out around the rocker arms, etc.

Follow Ups:

• Re: Re: F-20 oil pump Tim 12:09:38 08/21/03 (0)
• Re: Re: F-20 oil pump andrew 11:42:22 08/21/03 (0)
• Re: Re: F-20 oil pump Toot 09:40:17 08/21/03 (1)
  • Re: Re: Re: F-20 oil pump Nebraska Cowman 18:38:52 08/21/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: F-20 oil pump Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]