Starter- Copper wire disconnected...

Posted by Matt on October 05, 2003 at 18:35:58 from (63.170.71.99):

My starter wasn't working at all on my Farmall 450 gas -ground. So I took it apart and found the thin flat copper wire that connects to the bolt was disconnected(the copper-colored bolt that sticks outside of the starter and has the wire that goes directly to the solinoid.) I've tried getting it to stick back to the bolt using JB weld putty (but it didn't allow the electricity to flow through the putty). After scraping that off, I tried a 40/60 rosin core solder but couldn't get it to hold the copper wire to the bolt (it just didn't seem strong enough).

I don't know much about these, any ideas on a quick + easy way to fix this?

Thanks,
Matt

Follow Ups:

• Re: Starter- Copper wire disconnected... Bob M 05:13:33 10/06/03 (0)
• Re: Starter- Copper wire disconnected... Bob 19:10:54 10/05/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Starter- Copper wire disconnected... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]