Farmall model A cylinder walls

Posted by Mike on October 29, 2003 at 15:11:50 from (67.218.73.130):

While I had the head off for a valve job, I inspected the cylinder walls for wear. I noticed a ridge at the top of each cylinder from ring wear. Can anyone tell me if there is a tollerance for that before ring replacement. The engine does not blow any blue smoke except on inital start up for a few seconds, oil pressure good.
Thanks, Mike

Follow Ups:

• Re: Farmall model A cylinder walls Loren 16:51:36 10/29/03 (0)
• Re: Farmall model A cylinder walls Steve - IN 16:46:48 10/29/03 (0)
• Re: Farmall model A cylinder walls Allan 16:46:20 10/29/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Farmall model A cylinder walls Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]