Re: H bull gear removal

Posted by Aces on January 08, 2004 at 16:57:03 from (67.0.12.77):

In Reply to: H bull gear removal posted by ellson on January 08, 2004 at 14:01:42:

Ellson After you have the cap screw out of the inside end of the axel take the flat washer off put the cap screw bavk in the end of the axel put a short piece of shaft between the cap screw of both axels and screw the loose one back out it will push the shaft out as you screw the screw out. would not have had to take the housing off.

Follow Ups:

• Re: Re: H bull gear removal ellson 13:36:17 01/09/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H bull gear removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]