484 Clutch Problem

Posted by Dale Kite on March 02, 2004 at 20:23:13 from (65.137.129.218):

We have a 484 IH that we bought new in 85, the first clutch went out in 3-96 at 1300 hrs.,second clutch in 1-01 at 2050 hrs., and now at 2300 hrs.This tractor does very little loader work and was used with a round baler for only a couple years. In 1-01 installed a rebuilt clutch and pressure plate and had flywheel resurfaced. The last two pressure plates had one of the fingers worn off while the others were barely worn.Also the throwout bearing was in pieces.Could someone explain why this keeps happening? Thanks for any and all help.

Follow Ups:

• Re: 484 Clutch Problem JB 20:59:09 03/02/04 (0)

Post A Followup Name: E-Mail: Subject: Re: 484 Clutch Problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]