Re: Putting Mains and Rod Bearings in H

Posted by Aces on June 09, 2004 at 16:01:55 from (4.164.51.139):

In Reply to: Putting Mains and Rod Bearings in H posted by BB on June 09, 2004 at 13:16:17:

BB I would get a manual to make sure you put the caps on correct and not think they are on right just because the tractor run the way it is. 40 years ago I saw H's and M's with the caps on back wards so in a 60 some year old tractor who knows if they are right. The number should go to the cam side if it was marked right.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Putting Mains and Rod Bearings in H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]