M Wide front, broken spindle, where to find

Posted by Adam Whitson on September 12, 2004 at 17:11:11 from (12.145.226.29):

I have a 42 M, with a wide front end. I am not sure it is an IHC front end. I suspect it is either Swartz or off a 400. Anyway, i broke the right spindle. There is a number i can not read near the bottom of the spindle. I can not find any other numbers on the front end. There is a number on the cast-iron-center wheel 8782-DF, but Im not sure what will do. There is also 2 threaded holes on the inside flange on the bottom of each spindle. Anyone have picks or can tell me how to identify the front end. Where should I look for parts?

ABW

Follow Ups:

• Re: M Wide front, broken spindle, where to find Allan in NE 20:30:31 09/12/04 (3)
  • Re: M Wide front, broken spindle, where to find Dick Davis 02:42:11 09/13/04 (2)
    • Re: M Wide front, broken spindle, where to find Allan in NE 04:17:46 09/13/04 (1)
      • Re: M Wide front, broken spindle, where to find Dick Davis 02:28:50 09/14/04 (0)
• Re: M Wide front, broken spindle, where to find MN Scott 20:24:54 09/12/04 (0)
• Re: M Wide front, broken spindle, where to find Nebraska Cowman 17:58:57 09/12/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]