Re: HM Hydraulics--again

Posted by Allan in NE on September 17, 2004 at 12:16:00 from (148.78.243.26):

In Reply to: Re: HM Hydraulics--again posted by JohnG(TX) on September 17, 2004 at 11:58:08:

Hi John,

Thanks for offering to scan but you don't need to do that. I'll sure take your word for it.

I think I still have a couple of those check valves down at the farm setting on a window sill of the garage where they have been since the day those old tractors were delivered new.

All they were was a spring loaded ball/seat affiar setting inside of a machined 2" long coupler looking thingy.

The point I was trying to make was that the 'delayed' hydraulics was not at the tractor at all; and that the rear facing port is just another take off point for full hydraulic flow.

But I don't know, as I haven't ever used that rear port.

Is this how you see it and how you understand it to work?

Allan

Follow Ups:

• Re: HM Hydraulics--again Theman 12:48:36 09/17/04 (5)
  • Re: HM Hydraulics--again Charles in Indiana 13:33:04 09/17/04 (4)
    • Re: HM Hydraulics--again Theman 14:32:04 09/17/04 (1)
      • Re: HM Hydraulics--again Charles in Indiana 17:20:18 09/17/04 (0)
    • Re: HM Hydraulics--again Allan in NE 14:13:58 09/17/04 (1)
      • Re: HM Hydraulics--again Charles in Indiana 17:23:44 09/17/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]