706 PTO apart - sure enough broken pin

Posted by Andy R on September 19, 2004 at 21:03:31 from (69.66.64.243):

Like you guys said if the PTO worked right seconds ago and quit working entirely there was a good chance it would be the pin linking the valve assembly together. After taking the nut loose on top the upper valve came right out. Then after taking the lower cap off the rest of the valve fell out by gravity. Now I need help on getting it back together. Seems to me that the top square piece that pins to the linkage is going to have to come off. The upper and lower valve will have to be pinned back together and fit in from the bottom. Then the washer like umbrella and spring will have to be dropped in from the top. Then I would assume I would reattach that extenal square piece that hooks to the linkage. Questions: 1) How is that external linkage piece attaced? (roll pin?????) I assume this reattaches after the valve assembly is push in from the bottom??? 2) What is your recommendation on how to connect the upper and lower pieces of the valve? I assume Case/IH might sell a pin? Someone said to use throttle cable wire. The stiff stuff like on a lawnmower or tiller. Thanks guys.

Follow Ups:

• Re: 706 PTO apart - sure enough broken pin Spencer 18:14:02 09/21/04 (0)
• Re: 706 PTO apart - sure enough broken pin Aces 05:07:38 09/20/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]