Re: Can I use my Super C for brush clearing?

Posted by Brad Waters on September 28, 2004 at 19:34:20 from (66.191.254.218):

In Reply to: Can I use my Super C for brush clearing? posted by Kyle (Ky) on September 28, 2004 at 07:16:10:

I have a SC that I put a 3 point on,and I use it to mow my yard with a new 72in Bush hog finish mower,and it does fine,but I mow about 2 times a week so it is not hard on my tractor at all,if I were going to bush hog a field,if a SC was all I had to use I would go with a 5 foot bush hog and raise it up and go over the whole feild first,then go over it again and let it down,it all depends on how high the grass is,but what I am saying is,work your way down,don't try to do it all at once,it would be to much for the tractor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]