Re: Couple of quick questions about Farmall H

Posted by rustyfarmall on October 12, 2004 at 06:16:12 from (216.248.75.153):

In Reply to: Couple of quick questions about Farmall H posted by Brian in NY on October 12, 2004 at 05:54:32:

The belts are tightened by adjusting the pulleys. The pulleys are both 2 piece, you adjust them by loosening the set screw, screws?, and the then rotate the outer half of the pulley inwards toward the inner half, it is on a threaded shaft, kinda like tightening a nut on a bolt. Both the water pump pulley and the generator pulley are made this way. If neither has been adjusted for a long time, you may have your work cut out for you. The size of bolts you need will be determined by the diameter of the bolt hole, and whatever lenght you need. Should be a minimum of grade 5. You can cover the distributor if you want, won't hurt a thing, but marbe not necessary.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]