Farmall & IHC Tractors Discussion Board |
Hydraulic (pwr. steering) problem - will this work
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by fixitforfree on January 07, 2005 at 20:08:07 from (4.227.122.245):
I have a 364 diesel that has the dual hydraulic pump setup - 2 seemingly identical pumps mounted back to back. 1 pump runs lift, 1 pump runs the power steering. They are getting weak. Can I simply buy a pump that fit the 444 diesel (similar to my 364)and plumb it to supply both the lift and the power steering? Why do I need 2 pumps - they cost $500 to replace vs. $250 for the single pump to fit the 444. My buddies 444 made me wonder. It has the same pump as my front pump yet it has enough flow to supply his lift and steering. But, the 444"s steering cylinder setup is different, under the engine where mine is on the left side running parallel with the tractor. What am I missing here, will this work? IH part #704330R95 for "single" 444 pump IH part #3063911R93 for "dual" 364, 354 pump
Follow Ups:
Home
| Forums
Today's Featured Article -
The Cletrac General GG and the BF Avery A - A Bit of History - by Mike Ballash. This article is a summary of what I have gathered up from various sources on the Gletrac General GG and the B. F. Avery model A tractors. I am quite sure that most of it is accurate. The General GG was made by the Cleveland Tractor Company (Cletrac) of Cleveland, Ohio. Originally the company was called the Cleveland Motor Plow Company which began in 1912, then the Cleveland Tractor Company (1917) and finally Cletrac.
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|