Re: IH 606 gets stuck in gear

Posted by K.B.-826 on January 21, 2005 at 19:35:16 from (209.163.30.85):

In Reply to: Re: IH 606 gets stuck in gear posted by PAULIH300 on January 20, 2005 at 17:53:59:

Paul, your main clutch and TA clutch linkages are out of adjustment. When you depress the clutch pedal, the main clutch and TA clutch both disengage. As you know, whenever the the TA clutch disengages, it is possible for the TA ramp and rollers to engage. Your pedal linkage is not totally disengaging the TA clutch, just enough that the ramp and rollers grab, creating the effect of being in Direct Drive and TA at the same time. This causes the whole transmission to bind up, making it hard to get out of gear. This makes the worn shifter problem much worse. I would say that you don't need to build up the end of your shift lever yet, just go through the adjustments.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: 65534p> Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]