Re: Hydraulic Plumbing

Posted by EricB on January 31, 2005 at 07:38:52 from (216.209.84.11):

In Reply to: Hydraulic Plumbing posted by PAULIH300 on January 30, 2005 at 13:41:05:

Paul:
I agree with CNKS! I'm confused!

So the dual action cylinder works fine, but its backwards. Thats not a problem but you say the single is where the problem is. If you reverse the feed and return lines so the dual action works correctly then you have no response from the single action control. At least thats what I think you said.
I don't have the same machine but I do run dual and single action cylinders. I had to change the inside core of one controler to a "single action" control. otherwise you are blocking your return flow and seizing up.
Perhaps whoever worked on it thought you'd be using a dual action cylinder. If you switch the hoses so the dump works off the other controler and vise versa do you have the same problem? If so I would say the controller is not set up for a single action cylinder.

Just my 2 cents worth

Follow Ups:

• Re: Hydraulic Plumbing CNKS 08:46:20 01/31/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]