Re: IHC vs. JD

Posted by Aces on February 18, 2005 at 14:09:34 from (4.164.168.229):

In Reply to: IHC vs. JD posted by farmer girl on February 18, 2005 at 11:27:22:

Take a look

This might interest to you Nebraska Tractor test.

Super M peak torque 362.8 @991RPM through 845RPM and 355.3 @ 770RPM

JD 70 peak torque 287.9 @ 805 RPM- 748RPM only 21 lb/ft more than the little o Super H @ 266.9lb/ft

IHC 400 peak torque 412.5 @ 924 RPM only 12lb/ft short of the big banger (JD80) 424.4 @ 748 RPM

The 70 had more CID’s per cylinder than all 4 of the H’s cylinders put together the 80 is the same to the 400, looks like they both held their own.

Maximum low gear pull

Super M 5676lbs @ 2.45mph

400 6508lbs @ 2.18mph

JD 70 5453lbs @ 2.18mph

JD720 6647lbs @ 1.24mph

450 7318lbs @ 1.44mph

Big Bang 7394lbs @ 2.06mph

Sounds like a lot of poppin and very little pullin.

JD 4850 PTO 192.99HP Draw bar 164.73HP

5488 PTO 187.22HP Draw bar 163.44HP

The JD’s always had such good fuel economy well HP means Fuel if you look at the numbers they should use less fuel.

IHC 4786 low gear pull 33,468lbs @ 2.15mph the tractor only weighed 34,350lbs.

Follow Ups:

• Re: IHC vs. JD bill koob 16:42:56 02/18/05 (2)
  • Re: IHC vs. JD supermpuller 11:12:48 02/19/05 (1)
    • Re: IHC vs. JD bill koob 06:00:12 02/20/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]