400 Farmall Steering part II

Posted by grubby on March 29, 2005 at 07:00:15 from (69.20.202.54):

If you read my previous post I had some questions about the setup on the steering of a 400 Farmall. The tractor has power steering and I'll be the first to admit that I'm new to red tractors, the hoses from the steering return to a tank under the dash and I'm guessing this is a pressure a valve under the hood that says Gressen or something like that on it. I installed a new bearing on the worm gear shaft. The old bearing was broken. The tractor has an American Loader on it and 6.50x16 tri-rib tires. I took the tractor for a short test run and it steers pretty good with only a slight chatter in the steering wheel when moving and steering. But, when the tractor is stopped it is impossible to steer the tires. Is this normal, am I expecting too much from the power steering.

Follow Ups:

• Re: 400 Farmall Steering part II JOSSETTE 18:19:40 03/29/05 (0)
• Re: 400 Farmall Steering part II chadd 13:28:08 03/29/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]