farmall 350 hydraulics

Posted by Peter B. on July 10, 2005 at 15:42:09 from (68.254.59.116):

The hydraulic system on my Farmall 350 started acting up. When the tractor is started, the hydraulic pump is dead heading the hydraulic oil. The motor pulls down. When I actuate a lever to the fast hitch or to a remote cylinder, the oil flows thru and engine unloads. As soon as the lever returns to center, the motor agains pulls down as the oil is "dead heading" I took the regulator valve apart and everthing looks good. Everything moves freely including the ball/seat. I put a new "o" ring on the plunger, cleaned out all the ports, re assembled and it still dead heads. I even took the power steering unit out of the hydraulic system to see if it was the problem. No luck. Any one have any ideas as to why the hydraulic system would "dead head" while not actually being used.???

Follow Ups:

• Re: farmall 350 hydraulics TDK 18:23:13 07/10/05 (2)
  • Re: farmall 350 hydraulics Peter B 16:46:24 07/11/05 (1)
    • Re: farmall 350 hydraulics TDK 06:23:08 07/12/05 (0)
• Re: farmall 350 hydraulics Perry County Farmalls 18:14:25 07/10/05 (0)
• Re: farmall 350 hydraulics Aces 17:04:26 07/10/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]