Re: Working on the M

Posted by Randy-IA on January 08, 2006 at 10:45:48 from (207.177.83.5):

In Reply to: Re: Working on the M posted by Randy-S.E.MN on January 08, 2006 at 07:06:52:

Hi Randy , Man , this can get confusing ! I don't know if I'm talking to myself or not anymore with all the Randy's that post here :) !

Did you have any trouble getting the upper bushing out and how did you do it ? And the lower thrust bearing and bushing ? I'll probably find my shaft in the same condition as you found your's . It may be easier to just go to the boneyard and pick up a different one if it comes to that . I went to the boneyard yesterday morning and boy they have a LOT of M's and H's laying around . I should be able to find a good ( better ) one .

I'll still have to wait for warmer day's to do it though . The wind's blowing and the chill is down there even though it's 40 out , sure wish I had a indoor place to work on these tractors so I could get something done on them !

Where in southeast MN are you , I'm about 1.5 hours south of Austin just to the west of HWY 218 .
Take care ...Randy

Replies:

• Re: Working on the M Randy S.E.-MN 05:34:54 01/09/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]