Re: Broken Ram on 300 Utility

Posted by Janicholson on January 10, 2006 at 22:29:18 from (66.173.50.90):

In Reply to: Broken Ram on 300 Utility posted by Joe Kimbriel on January 10, 2006 at 17:49:54:

We (my dad's design) lifted a V snowplow with downforce on the two point pivoted under the rear axles and extending under the front axle of a 350ute. We still have the 350, but the plow was worked to scrap. Probably near 3000 pounds of down on the hitch with out problems. The ram is probably weaker from wear at the lower casting. The ram also pulls less than it pushes due to the cross section of the ram shaft on that end.
I think it will fix well if prepped and "V"ed out.
JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]