Converting to two way hydraulics

Posted by NSC on February 14, 2006 at 06:22:21 from (12.2.142.7):

I want to convert my M to have two way hydraulics. I have found a good pump and valve for roughly $350. One, is that a good price. Two, how do I do the conversion. I have heard you have to remove the current pump from the tractor, make some hosing or piping of your own, and possibly a mounting bracket for the pump. This one already has a flange on it that is slightly slotted to allow for adjustment. I am basically researching what I need to do to convert it, and how it will be to accomplish that, and if the valve and pump are all I will need.

Replies:

• Re: Converting to two way hydraulics P Backus 15:18:41 02/14/06 (0)
• Re: Converting to two way hydraulics Nat 2 10:06:25 02/14/06 (0)
• Re: Converting to two way hydraulics Janicholson 07:04:49 02/14/06 (1)
  • Re: Converting to two way hydraulics Janicholson 07:08:35 02/14/06 (0)
• Re: Converting to two way hydraulics captaink 06:53:16 02/14/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]