Need hydraulic help, NH3 valve on air seeder

Posted by Steven@ND on April 10, 2006 at 18:11:04 from (72.20.78.220):

We want to use a hydraulic on/off valve for our anhydrous set up on our air seeder. We are out of remotes to operate it.

Would it work to tee off the lines that raise and lower the main chisel plow frame? Basically setting it up so that whenever you raise it out of the ground, it shuts off... and when you go down into the ground it comes on. Would a tee work? Or do we need some fancy valves?

Thanks for any help!

Replies:

• Re: Need hydraulic help, NH3 valve on air seeder billonthefarm 19:02:13 04/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]