Farmall & IHC Tractors Discussion Board |
SMTA Governor
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by GordoSD on May 16, 2006 at 06:58:11 from (66.115.200.140):
First of all thanks to everyone for all the "won't turn over" responses. It's running fine now. On to the next task. It seems the rpm is low at full throttle (fast idle), no load. Reviewed the manual and there is some great info there on setting rpms. Question is to get some sort of tach hooked up. I have my old dwell tach meter from the early 60's. No manf tag on it but it does have two function switches, one for 6-8 cyls, the other for "tach-dwell". Note on gauge face that "4 cyl engines-double 8 cyl readings" It has two alligator clip leads, a red and a black. It's been so long since I used this that I have forgotten where to attach them. Assume in some combination on the dist. As I said in earlier post with engine at fast idle, I screwed the idle stop screw on the carb further in I gained a ton of rpm (no load) but with that setting when I retarded the throttle the rpm just stayed up there and wouldn't come down until I backed the screw back out. All the likages and throttle plate are fine. When I drive it around the govenor is working, But with no load it's just adding a tiny bit of throttle on the hills. Need to get this old girl hooked up to the mower, looks like we'll get our first cut of alfalfa in about 10 days. Gordo
Replies:
Home
| Forums
Today's Featured Article -
Check Your Coolant - by Bill Radford. Great tips on how and when to check the coolant in your tractor.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|