Farmall & IHC Tractors Discussion Board |
Re: 340 Utility Hydraulic Oil Leak
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JAS,Tn. on May 20, 2006 at 20:05:25 from (67.72.98.47):
In Reply to: 340 Utility Hydraulic Oil Leak posted by Rockbasss on May 20, 2006 at 17:31:17:
THERE IS AN AREA ABOVE THE HOLE YOU SEE,ONE ON EACH SIDE THIS IS A DRY AREA INSIDE .iF YOU TAKE THE COVER OFF ON TOP YOU WILL SEE THE DRIVESHAFT FROM ENGINE TO TRANS . YOUR SEAL IS LEAKING ON THE TRANS . SIDE. YOU WILL HAVE TO SPLIT TRACTOR AND REPLACE SEALS. dO YOU HAVE AN IPTO IF SO THERE IS A SEAL IN THAT SECTION ALSO.GET YOURSELF AN IT MANUAL AND IT WILL SHOW WHERE THESE PARTS ARE AND FOR WHICH TYPE PTO YOU HAVE.i HAVE A 300 UTILITY AND FROM YOUR PIC IT LOOKS ALMOST THE SAME. hOPE THIS HELPS YOU SOME JOHN
Replies:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|