Re: C fenders on H

Posted by Nat 2 on June 10, 2006 at 20:39:17 from (64.80.110.33):

In Reply to: C fenders on H posted by SLH form MO on June 10, 2006 at 20:16:19:

The base of a C fender is designed to clamp around a hexagonal axle housing, while the H/M fender is meant to bolt into holes on the top of an axle housing, right?

Normally, you add extension plates and spacers to move the fenders out closer to the tires and up, so it should be a simple matter of getting a piece of flat steel of the appropriate size and drilling holes in the appropriate places.

But no, they don't make anything like that.

Replies:

• Re: C fenders on H Rexalot 11:39:42 06/11/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]