Re: M won't wind up- strange troubles

Posted by Janicholson on July 07, 2006 at 06:05:10 from (199.17.6.122):

In Reply to: M won't wind up- strange troubles posted by the Unforgiven on July 06, 2006 at 20:50:07:

The carb is disconnected from the governor at the link where the governor tube attaches to the top/front of the carb. Take the carb off and you will see a linkage on the shaft that must be aligned and indexed into the throttle shaft lever. It is a delicate and important part of putting the carb on, and easy to have wrong. (and not visible from the out side). The idle Mixture screw probably needs to be richened to make it idle W/O choke. (I think in is richer on this carb). JimN

Replies:

• Re: M won't wind up- strange troubles the Unforgiven 06:15:40 07/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]