Re: Super H won't idle down

Posted by Leo S on August 14, 2006 at 20:36:26 from (64.33.238.23):

In Reply to: Re: Super H won't idle down posted by Brownie 45 on August 14, 2006 at 05:27:06:

You were on the right track. I knew the thottle plate was not idiot proof when I put it together,and was VERY careful to put it in the correct way. I took the carb apart again today and saw a small gap where the plate was not fitting correctly when in the idle position.I took it out and reversed it to make sure I had it in the correct position. I did. HOWEVER, it was not properly aligned for whatever reason (assembled in dimly lit barn?) When I re-assembled the plate as I had originally had it, the plate aligned propperly as I tightened the screws. The plate closed properly. I reassembleed the carb, put it on,and she idled down just like she should. I still don"t see why the plate didn"t align when I tightened the screws originally,but she works fine now. Thanks, Leo

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]