Re: TV---- OTHERS 756 PTO ADJ

Posted by Owen Aaland on July 11, 2007 at 17:31:10 from (65.165.246.40):

In Reply to: TV---- OTHERS 756 PTO ADJ posted by lenray on July 11, 2007 at 16:22:34:

Completely assembly the linkage. Install the gauge using the adapter. Start the tractor and run the engine at PTO speed. Engage the PTO. Turn the stem in or out to obtain the proper pressure. Use the lock nut to keep the adjustment from changing.

I use an allen wrench in the hole in the stem. They are strong enough to turn it and you have both a straight end and a 90 degree end to be able to get it in the hole.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]