Re: half of tranny 685

Posted by Janicholson on July 28, 2007 at 06:22:17 from (71.87.39.51):

In Reply to: half of tranny 685 posted by karl f on July 27, 2007 at 23:44:31:

I am not framiliar with that trans, but I do know that the positioning of an interlock shaft (preventing shifting the trans in ways it cannot operate) is very important. If the parts diagram shows bolts in the Wiggling component, I would get their size, and put new ones in. I would also tighten the remainder as they may be crucial to the preload applied to coponents. It is a place to start, and is less invasive than other options. The worst possible situation is that the blts could be loose because the former owner had been inside with an intent to repair with marginal understanding, and no manual. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]