The knocking suggests it's going to take more than a piston, sleeve and gasket set. When you start rebuilding crank shafts, you could quickly find the cost doubles.
Your other engine should be a simple bolt up. If your not a pro as you seem to suggest, practice by removing the junk engine first. That way if you break something, you'll learn how to do it without breaking the same item on the good engine. Like you, I'm not an engine man, and tend to farm those out to pros. I just had a quote of possible $2,300. on my Farmall 130 engine. It doesn't have any strange noises, just blow by, and it's power isn't really that bad. One thing I find with rebuilders they use what they quote and appologize for the overrun. Oh, for the good old days when a pro would tell you, "It wasn't as bad as I expected, it's only going to cost 70% of what I quoted."
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
