Posted by ViperDave on November 16, 2007 at 07:09:49 from (148.78.54.134):
I posted this in 'tractor talk' and someone suggested I put it in the IH forumn.
I have posted pics of the 1926 coming home. Where now do I start???
I confirmed with my uncles that the motor had been rebuilt and never started, parked in the woods for 50+ years.
I pulled the head off of the tractor. The pushrods came out ok, some of the values move very easy, the other are sluggish. A couple of the values still have a grease pen marking on the bottom with the # of the position of the value during the rebuild!. The pistions are pretty rusted. The crank looks almost new with a little bit of surface rust.
The transmission shifts but the clutch seems froze. I have heard of a local engine builder, have a media blaster and a paint/body guy lined up. Do i pull the motor and give to the motor guy or take the whole tractor? What is the order for attacking this project? I need to go get the 1927 and see which one I should rebuild first.
I need one of the tractors ready for a show on Labor Day of 2009. Any help would be greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
