Posted by Chris NW Ind on February 04, 2009 at 16:52:01 from (4.159.233.147):
Just picked up a new spring this morning at $32! I have the 2 owner's manuals and the IT manual, but neither is clear on the installation of this spring. Here are my observations:
With no spring, engine running or not, the counterweight is pointed forward and I believe the valve butterfly is more or less vertical. I can rotate the valve shaft counterclockwise till the counterweight is vertical and I believe the butterfly is closed. When I hold the shaft counterclockwise with the engine running, I feel a significant amount of force tending to rotate it clockwise when I accelerate the motor. This is what leads me to believe the butterfly is closed and the pressure of the exhaust is trying to force it open.
So, my question is, how exactly is the spring installed/preloaded? If I were put it back on the way I removed it, nothing would ever happen. The valve would stay open and the spring tightening clockwise would only keep it open.
I have an engine service manual for the C263 coming, but I’m wondering what you know. I couldn’t find anything in the archives.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.