Posted by maplehillfrm on May 03, 2009 at 21:49:08 from (74.32.135.146):
well I guess if you leave things alone long enuff they break to the point you can fix them :? ,,
day before yesterday I used the backhoe, still had a little fuel coming out teh blowby pipe, I checked the oil and it was a quart or so low, I only had to work it a little so I didnt add any,, today the neighor want to borrow it to move a couple yards of dirt,, I knew it needed oil so we checked it,, it was full!!!!-- but not of oil, it was overfull of fuel, it dripped off in my hand when checking,,
so I NOW have fuel in the crankcase, where it can maybe be diagnosed better than just coming out the blowby pipe and not in teh crankcase as before,,,
so where do I start looking for the culprit?
injector?
the front lip on the injector pump? how?
rings? I hope not..
no loss of power, and no significant smoke issues, starts quick and easy,,
thanks guys I appreciate any ideas,pat
BTW international 2500A backhoe, with the d239, bosch injector pump.. europe?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
