Posted by IH fan on April 28, 2011 at 12:30:26 from (99.151.42.161):
240U starter quit on me. Had been spinning but the drive was not engaging every time. It would eventually catch and spin the motor, but sometimes I would have to hit the button 3 or 4 times before it would catch. Then about 3 or 4 weeks ago it started "clicking" the solenoid but sometimes not spinning the starter. I could tap on the solenoid with a wrench and it would make contact. Then this week it would not not spin even tapping on the solenoid. Took it off and to an "auto electric" shop. Guy said if it was still a 6v. starter that could be the reason it was not engaging the drive all the time... spinning to quickly before engaging. He can switch the field windings to 12v. for $40 something and is fixing whatever else is wrong. Drive gear was badly worn, solenoid is probably shot and who knows what else. Hope I get it back for less than a couple bills.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
